14

The three-piece slurry valve is available with manual, electric and hydraulic options

The three-piece slurry valve overcomes the shortcomings of the conventional flat gate valve that only transports a single medium (oil or water), and has good sealing performance when it is fully open and closed, and is a new type of valve with high technology, high quality, low liquid resistance, simple structure and reliable operation. It is widely used in the slurry transportation of granular materials in mines, power plants, metallurgy, chemical and other departments, especially in medium and high pressure slurry pipelines, and is an ideal replacement valve for slurry pipelines. By the ram plate and the left and right sealing plates are composed of three pieces of valve dynamic sealing pair, all the wearing parts are concentrated in the left and right sealing plates, when the parts need to be replaced, just disassemble the left and right valve plates, it can be easily replaced, solve the problem of perforation of the gate plate of the granular mud valve, and the inconvenience of disassembly and assembly after the damage of the parts. It is divided into monolithic, two-stage and three-stage type. The valve body casting adopts the advanced technology introduced from Taiwan, with reasonable structure and beautiful shape. The valve seat adopts an elastic sealing structure, which is reliable in sealing and easy to open and close. The stem adopts a bottom-mounted structure with an inverted seal, and the valve stem will not be impacted when the valve cavity is abnormally pressurized. The three-piece dynamic seal pair is composed of the ram plate and the left and right sealing plates, which reduces the volume of the valve cavity to almost zero. Therefore, it completely solves the problems of granular slurry valve and other old-fashioned slurry valves, which are not in place to open and close, perforated, and inconvenient to disassemble and assemble due to slurry deposition. At the same time, it also reduces the abrasion of the overflow parts, and has good opening and closing sealing, all the wearing parts are concentrated on these three plates, when the parts need to be replaced, as long as the upper valve plate is disassembled, it can be replaced at any time, which solves the problem of perforation of the granular mud valve gate plate and the inconvenience of disassembly and assembly after the parts are damaged. Depending on the pressure, manual, electric and hydraulic options are available.